- Technical Specifications
- Accessories
- Downloads
CONSTRUCTION:
Round 6″ fixtures with integral LEDs. Class 2 isolated external driver factory installed inside junction box.
One driver for every fixture required.
MOUNTING:
Cut out hole in ceiling (6 1/4″ to 6 1/2″) and snap fixture in opening with attached spring clips.
Space in ceiling needed for the driver to fit through the hole – 1 1/2″.
- Driver Input Voltage: 120V AC (Dimmable)
- Optional Driver Input Voltage: 277 – 347 V AC (Not Dimmable)
- Power factor: > 0.98
- Energy Used: 14W
- Halogen equivalent: 75W
- Beam Angle: 110°
- Light colour options: Warm White 3000K and Neutral White 4100K
- Light output: Warm White 900 lm, Neutral White 930 lm
- CRI: 80 for the 3000K and 80 for the 4100K
- Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
- Compliance: cULus Listed, certified to CSA STD. C22.2 No. 250.0
- Rated: Type IC (Direct Contact with Insulation), Energy Star, Air-Tight
DIMENSIONS:
- ID 6 1/8; OD 6 3/4″; Thickness 1/2″
- Cut out: 6 1/8″ to 6 1/4″
- Junction Box Dimensions (with driver inside): 3 3/4″ x 3 3/8″ x 1 1/2″
Suitable for damp locations and soffit installations.
Extension Calbes
- EXC10
Rough-in Plates
- RIP6
- MP6-2
- FRP6
120-347V / 0-10V Dimmable
- LLL-LD1535TB
Goof Rings
- GR6

