- Technical Specifications
- Accessories
- Downloads
CONSTRUCTION:
Round 6″ fixtures with integral LEDs. Class 2 isolated external driver factory installed inside junction box.
One driver for every fixture required.
MOUNTING:
Cut out hole in ceiling (6 1/4″ to 6 1/2″) and snap fixture in opening with attached spring clips.
Space in ceiling needed for the driver to fit through the hole – 1 1/2″.
- Input Voltage: 120V Triac Dimmable
- Power factor: > 0.98
- Energy Used: 14W
- Halogen equivalent: 90W
- Beam Angle: 110°
- Light colour options: 5CCT User Selectable
- Light output: 2700K 910lm, 3000K 970lm, 3500K 1050lm, 4000K 1070lm, 5000K 1030lm
- CRI 90+
- Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
- Compliance: cULus Listed, certified to CSA STD. C22.2 No. 250.0
- Rated: Type IC (Direct Contact with Insulation), Air-Tight
DIMENSIONS:
- ID 6 1/8; OD 6 3/4″; Thickness 1/2″
- Cut out: 6 1/8″ to 6 1/4″
- Junction Box Dimensions (with driver inside): 3 3/4″ x 3 3/8″ x 1 1/2″
Suitable for wet locations and soffit installations.
Mounting Plate Flat
- model #MP6-2
- model #RIP6
Mounting Plate Flanged
- model # FRP6
Jumper Cable 10ft – maximum extension 40 feet
- model # EXC10-5CCT



